The Love Shack (definitely not W R A T H again)


Kanal geosi va tili: ko‘rsatilmagan, ko‘rsatilmagan
Toifa: ko‘rsatilmagan



Kanal geosi va tili
ko‘rsatilmagan, ko‘rsatilmagan
Toifa
ko‘rsatilmagan
Statistika
Postlar filtri


From birth until death, our rасіаl еnеmіеs have shown nothing but hаtrеd for our Rасе, and imbibed that hatred with their mother's milk. They are told stories of the wrаth of the White Gods, but very few have experienced it firsthand. The hour is coming soon where they shall learn the true extent of the power, drive, and Hаtrеd of the White Gods. They will soon discover they are powerless to resist and will appeal to our kindness and "humanity," but this time will be different. This time, it will be final. Show them your WRΑТH, and revel in their tеrrοr.

@DerLoveShack


🔥Aryan Arsonist🔥 dan repost
We do a little lovin


Prime time is in a few days, saffer bros. Don't shirk your duty


Alea iacta est ~ Surf that Kali Yuga dan repost
SAPREF oil refinery shutting down.
Expect major fuel supply disruptions.

Alea iacta est
@CriticalHappenstance


Arminius gang, wassuh




Sam 🥩🥛 dan repost
We destroyed it


Frank Twinkfano dan repost
My people built the Roman empire what did your people do


W


Corona Chan News 🦠 dan repost
Type W for White solidarity with South Africans 🙋‍♂️


You have no excuse not to possess a firearm. Philip Luty did hard time in the clink so you could be armed with the knowledge of how to arm yourself.  Duncan Lemp, while not necessarily ideologically aligned with us, still gave his life for advocating for your ability to possess a firearm. Those contemptible lolbertarians on keybase are working their asses off every day FOR FREE to invent new methods of arming yourself without alerting the System. You're a fucking ungrateful sack of shit if you do not buy, make or otherwise procure a firearm.

"This is my rifle. There are many like it, but this one is mine.
My rifle is my best friend. It is my life. I must master it as I must master my life.
Without me, my rifle is useless. Without my rifle, I am useless.
I must fire my rifle true. I must shoot straighter than my enemy who is trying to kill me. I must shoot him before he shoots me. I will ..."


This doctrine is applicable to every one of you.

You are useless without a firearm.

@DerLoveShack










Procuring Components

Right now is an interesting time to get into reloading, since the ammo industry is working overtime to cope with the massive influx of orders from all sides. Component shortages abound, and enterprising niggas have had to get creative in order to stay ahead of the boomers and retards that are buying up all the supplies. As you may or may not know, there are 4 components in a complete cartridge: the brass case, the bullet, the primer, and the powder. We have covered making your own bullets and scrounging for brass, but sometimes you need a specific bullet for whatever purpose and oddball cases are not easy to find lying around on the range, so the need to buy some components is unavoidable. I have found several reliable methods to get what I need without waiting for an inordinate length of time. There will be a list of anticipated complaints at the end followed by my rebuttals. My methods are:

1. Local gun stores
The big online retailers might have some things, but lately they have been all but tapped out. I've had good luck finding powder and sometimes primers at a local mom and pop gun store.

2. Mewe
Yeah I'd never heard of it either, but apparently it's where a ton of boomers have migrated after zuck pissed them off. They allow sales groups for guns and ammo and all kinds of shit, but it's at your own risk since it's a private transaction and not insured or covered by a warranty. I've had good luck finding bulk brass and even oddball brass for cheap. Just make a sock acct with no identifying details and you should be good to go.

3. Discord
Discord has a cool notification system, and theres a specific group I will link that is a collaborative effort where whenever a member finds a deal on a specified component or something in stock they post it to the group and you get a notification on your phone whenever your specified component is in stick somewhere. This has been my most reliable method of finding primers and powder. I can usually find whatever I'm looking for in stock somewhere within a day or two. Just make sure and not put any PII in your acct and don't show your power level because they're ledditors and they hate wignats like us. No fashy shit, you'll get banned almost instantly. Just use their effort to further your own agenda and let them seethe. (I actually hope they see this post, lmbo)

4. Estate Sales
Boomers are dying left and right these days, and it's to our benefit. Often when a boomer dies his wife will sell his shit at a huge discount since she doesnt know what it's worth. Keep an eye out and you'll find some killer deals.

Complaints

>bro this is a lot of work
Have sex, incel

>bro, (((discord)))
Yeah I know it's gay but its effective and you gotta play the hand you're dealt. Use a vpn, practice opsec, and stay out of the chats. You'll be fine

>bro this is expensive as fuck
Yeah it's a high buy in, but as I explained earlier you will ultimately spend less cumulatively for a reloading setup and 1500 rds of 5.56 than you would just buying 1500 rds of 5.56.

#reloading
t.me/DerLoveShack


Casting Bullets

This is a significant cost saving measure, and another way of detaching from the Beast System. So easy even a nigger could do it, there's no excuse to keep paying out the nose for primo "match grade bullets" for all your loads, especially if they're for plinking, range time, or tactical training and weapons handling. You will need some more gear (yes I know, your wallet's getting thin) but compared to the previous purchases this is relatively inexpensive. You will require:

1. A Mold
You need a mold for every bullet you want to cast, since they are all different weights, shapes and sizes. You need to work up the load you want to make before choosing your mold, since they make dozens of different shapes and weights for every diameter. I personally prefer multi-cavity molds so you can maximize the amount you can cast in a given time, but the single-cavity molds work just as well, only slower. You can expect to pay around $40 for a single cavity and a much more exorbitant amount for the multi-cavity molds.

2. A Furnace
A furnace (melting pot) is how you melt your scrap lead to pour into ingots. Alternatively, some people use a cast iron skillet and heat it over a propane pot heater, which works great for big melts but is a little more finicky when casting boolits since you have to pour the lead with a dipper. I personally melt my wheel weights I get from tire shops with a skillet and pour that lead into a muffin tin for my ingots. I then put those ingots into my furnace (I prefer bottom pour) to cast with. Whichever way you prefer is fine, it's mostly preference.

3. Flux
Flux is what purifies your melted lead, which will be full of impurities if sourced from digging up berms or used wheel weights. There are dozens of different brands to choose from, and I'm sure they all work fine, but my flux of choice is yet another cost saving measure: sawdust. I take a 5 gal bucket to my local sawmill and they provide me with unlimited sawdust for free. Once your lead is melted, just throw that shit in there and stir it in with your dipper and once you've stirred for a little bit the impurities (dross) will float to the top. You can then scoop that shit out and pour it on niggers if they walk too close to your HateShack™️. After you have removed your dross, cover the melted lead with another layer of sawdust to prevent oxidation of the surface layer, and you're set to either cast your boolits or pour your ingots.

4. A Sizer
Whenever you cast, your bullets are not always the correct size. You need a sizer to squeeze it down to the right size so it will correctly engage the rifling and fit well in your case. This will be covered in more detail in the pdf, but expect to pay around $20 for a sizer.

5. Coating or Lube
You need either to either coat your bullet (with powdercoat or other methods) or use a lubrisizer to squirt lube into the lube groove of your bullet to prevent lead fouling of your barrel. I will provide a link in the pdf section on powdercoating and the bullet casting pdf covers lubrication.

And that's it! You are now prepared to go cast your own boolits and go [REDACTED] your local [REDACTED].
You also need to consider the hardness of your bullets specific to their intended usage and your gas checks, but those are both covered in the pdf I will link at the end.

#reloading
t.me/DerLoveShack


Gear

Ok, here's the part where you clutch your wallet and tell me to fuck off, but hear me out.  You can expect to pay anywhere from $200 - $500 for a new reloading kit, or less if you get one used from a private party (i.e. an estate sale or online listing). This is admittedly a substantial investment, however you will make your money back by the time you've made 1000 - 1500 rounds since ammo is astronomically high these days. You can further increase your cost effectiveness by scrounging for range brass and casting your own bullets from scrap lead, which I will go into later.

For a beginner, I would recommend you start with a single stage press, since I don't think the increase in price and complexity (like indexing moving parts, changing shell plates, etc.) is offset by the modest increase in efficiency. The brand isn't super important, since most dies are interchangeable with any 7/8" press. Hornady, Lee, and RCBS presses all work great. Ignore that retarded boomer in your local gun store that tells you that all *insert brand* presses are shit because one time he broke his while using it for something it wasn't designed for. A reloading kit will have the majority of tools you will need, but there will likely be a few you will also need. This is not an all inclusive list, but should be most of your big ones.

1) Manual
The most important tool in your arsenal is your manual. Your manual is written in the blood of men before you who paid dearly for their mistakes, and it accompanied with a sound head on your shoulders will take you a long way. I recommend you read through your manual before you even take the press out of the box, so you will have a solid grasp of the concepts you'll be dealing with. I will include a pdf of a highly regarded manual in the pdf portion of my post.

2) Brass tumbler
There are many myriad tumblers you could buy, and they all work fine, but I just use a cheap ass harbor freight tumbler. Walk your ass into the pet store and get a bag of crushed walnut terrarium filler for media. Add a splash of car polish and tumble for a few hours and your brass will shine like a new penny.

3) Dies
For every round you want to reload (9mm, .223, 7.62x39, etc.) you will need the corresponding set of dies. Your dies reshape your brass after it has been fired and expanded by being shot. As with presses, most dies work great and all are interchangeable, and on the off chance you fuck them up all the large companies have great warranties. You can expect to spend from $40-$80 on a set of dies.

4) Case trimmer
Every time you load and fire a piece of brass, it grows in length from the immense internal pressure. Some rounds headspace off the case mouth, and if you don't trim your brass within spec, you can end up with an out-of-battery discharge, which fucks niggas up big time. Manual trimmers work fine, but are pretty slow. If you wanna trim at high speed, most big gun websites sell trimmers that attach to your hand drill. Both work well and cost from $40-$60.

5) Calipers

You need calipers to measure your case length and cartridge overall length (coal). I prefer dial calipers or vernier calipers since they don't take batteries, but digital ones will work too. Good calipers are pricey, but I find myself using them for all manner of things, not just reloading. Expect to pay $80+ for a nice pair, and some pretty ok digital ones can be found for around $40.

#reloading
t.me/DerLoveShack


Expectations

This isn't a zero-effort endeavor, and you don't get something for nothing. For every shekel you save, you have to invest some of your time. However, if you are willing to make the time then you can net a tangible reward (boolits and saved money) as well as knowledge and experience. Some cost saving measures include: scrounging for range brass, digging up range berms and looting tire shops for scrap lead, reloading primers, and perusing estate sales for components.

#reloading
t.me/DerLoveShack


On Reloading

My goal with this post isn't to teach in depth or give specific loads or anything data oriented, since this is an massively broad topic and many old geezers with decades worth of knowledge have done a much better job of it than I ever could.  What I aim to accomplish is:

1. Lay out your expectations (realistic or otherwise)

2. Help you identify the gear you will require to begin manufacturing your own ammunition

3.  How to cast your own bullets, and where to start

4.  Procuring components

5.  Postin' them mf PDFs nigga

You interested in denying the ammo manufacturing jew your shekels?  You want to disconnect from the beast system?  You want a 7 days free trial of my exclusive reloading primer?  Read on, fren.

Hyperlinks to each section: 1 2 3 4 5

#reloading
t.me/DerLoveShack

20 ta oxirgi post ko‘rsatilgan.

142

obunachilar
Kanal statistikasi